SC60TX

Combining exceptional power and enhanced mobility, the SC60TX is the ideal self-propelled stump cutter when you need a compact machine. Its undercarriage retracts to a mere 35”/89 cm wide for confined areas. Rubberized tracks maneuver easily on virtually all kinds of terrain or ground conditions. Patented AutoSweep® system and gear drive help improve productivity. Yellow Jacket™ Cutter System helps extend pocket and tooth life and facilitates routine maintenance.



Features and Benefits

  • Turn on a dime – the SC60TX has a zero turning radius.
  • Minimize ground disturbance because the rubber tracks reduce ground pressure.
  • Keep your distance when you opt for the remote control, which operates the stump cutter up to 100’/30.5 m away from the unit.
  • Protect your investment with a 3-year/3000-hour extended limited warranty on applicable gearboxes and driveline, and a 1-year/1000-hour Vermeer equipment limited warranty.
  • See your Vermeer dealer for comprehensive service and genuine Vermeer replacement parts.
     

Specs

General Dimensions and Weights
Length 141.6" 359.7 cm
Width 51" 129.5 cm
Height 72" 182.9 cm
Weight - Engine Option One 3500 lbs 1587.6 kg
Sound Power 104.8
Engine Option One
Make and Model Caterpillar C2.2T
Number of Cylinders 4
Gross Horsepower (Maximum) 60 hp 44.7 kw
Torque (Max) 142 ft-lb 192.5 Nm
Fuel Tank Capacity 12 gal 45.4 L
Max Fuel Consumption 3.6 gph 13.6 lph
Fuel Type Diesel
Air Cleaner Dry-type, restriction indicator, evacuator valve, safety element
Oil Filter Spin-on
Recommended Oil 15W40 CAT
Oil Volume with Filter 11.2 qt 10.6 L
Maximum Angle of Continuous Operation 35 deg
Cooling Medium Water/Antifreeze
Coolant Capacity (Engine and Radiator) 2.9 gal 10.9 L
Alternator 62
Fan 15.4 " (31.1 cm)
Clutch Type Automotive-style diaphram with disc
Cutterwheel System
Cutterwheel Diameter without Teeth 23" 58.4 cm
Cutterwheel Thickness 1.1" 2.9 cm
Cutterwheel Speed 1080 rpm
Cutterwheel Straight Line Dimension 65" 165.1 cm
Cutterwheel Cut Above Ground 27" 68.6 cm
Cutterwheel Cut Below Ground 16" 40.6 cm
Tooth Description Yellow Jacket Cutter System
Number of Teeth 30
Number of Indexes 2
Number of Pockets 30
Reversible Pockets 30
Cutterwheel Guard Standard
Chip Containment 23 cu ft .7 cu m
Cutterwheel Drive Components
Upper Gearbox Straight bevel
Oil Type SAE 75W90 synthetic gear oil
Oil Capacity .4 qt .4 L
Lower Gearbox Straight bevel
Oil Type - Lower Gearbox SAE 75W90 synthetic gear oil
Oil Capacity - Lower Gearbox 1.6 qt 1.5 L
Driveshaft Driveshaft dampened
Driveshaft - U Joints 2 u-joints
Hydraulic System
Tank capacity 9.6 gal 36.3 L
Recommended Oil Type Vermeer VMF
System Type Tandem gear pump, pressure balanced
Filtration Method Full-flow 4 micron return filter, suction strainer
Pump Flow at Maximum RPM 7.2 gpm 27.3 L/min
System relief pressure 2900 psi 200 bar
Flow Control Yes
Directional Control Yes
Electrical System
System Voltage 12 volt
Battery 575 CCA
Standard Gauges Hour meter
Warning Lights Battery/Alternator, engine warning
Switches Boom swing, boom height, creep propel, ignition, clutch, track gage, track speed range, AutoSweep, throttle
Controller Vermeer C148 with AutoSweep
Shutdown System High engine temperature and low oil pressure
Radio Remote Control Optional, wireless
Chassis
Control Station Description Swing out
Operator Vision Shield Description Abrasion-resistant coated polycarbonate
Brake Type Spring-applied and hydralically released dual parking brakes
Track Drive System
Track Frame Description Tube and plate
Track Type Steel reinforced rubberized 9 " (22.9 cm) width, 54 pads
Track Width - Retracted 35 " (88.9 cm)
Track Width - Extended 51 " (129.5 cm)
Track Length on Ground 51.2 " (130.05 cm)
Type of Idler Cast with sealed bearings
Number of Idlers 10
Track Drive Pump Type Tandem gear pump, pressure balanced
System Relief Pressure 2900 PSI (200 Bar)
Pump Flow at Maximum RPM 7.2 gpm (27.3 L/min)
Track Drive Motor Type Integral motor and planetary unit
Track Brake Type Integrated into motor/planetary unit
High Speed Travel 1.3 mph 2 km/h
Low Speed Travel .7 mph 1.2 km/h
Ground Bearing Pressure - Soft Ground 4.1 psi 28.3 kPa
Ground Bearing Pressure - Hard Ground 12.6 psi 86.9 kPa
Remote Control Option
Radio Remote Control Option
Remote Functions E-stop, throttle, cutter wheel clutch, boom swing, boom height, propel, track mode, track speed range, AutoSweep
Remote Display Lighted L.C.D. with RPM and all functions status
Remote Range 300 ' (91.4 m)
Other Options
Special Paint Optional
Extended Warranty Optional
Preventive Maintenance Optional

Contact us now!

Our sales rep will get back to you asap.