With a focus on ease-of-operation, the compact design of the SC30TX offers intuitive controls, minimal service points and the performance of a machine that gets the job done. The modified operator presence handle design is now manufactured with a harder exterior to improve wear and appearance. This user-friendly handle system provides additional capacitance sensing capability and is intended to help protect the operator.
| Length | 94" | 238.8 cm |
| Width | 35" | 88.9 cm |
| Height | 49" | 124.5 cm |
| Weight - Engine Option One | 1550 lbs | 703.1 kg |
| Make and Model | Kohler ECH740 | |
| Number of Cylinders | 2 | |
| Gross Horsepower (Maximum) | 25 hp | 18.6 kw |
| Torque (Max) | 42 ft-lb | 56.9 Nm |
| Fuel Tank Capacity | 6.8 gal | 25.7 L |
| Max Fuel Consumption | 2.4 gph | 9.1 lph |
| Fuel Type | Gas | |
| Air Cleaner | 6 " (15.2 cm) 2-Stage dry | |
| Oil Filter | Spin-on | |
| Recommended Oil | Kohler oil or API CH4/SJ | |
| Oil Volume with Filter | 2 qt | 1.9 L |
| Maximum Angle of Continuous Operation | 25 deg | |
| Cooling Medium | Air/oil |
| Cutterwheel Diameter without Teeth | 16" | 40.6 cm |
| Cutterwheel Thickness | .5" | 1.3 cm |
| Cutterwheel Speed | 1110 rpm | |
| Cutterwheel Straight Line Dimension | 35.5" | 90.2 cm |
| Cutterwheel Cut Above Ground | 25" | 63.5 cm |
| Cutterwheel Cut Below Ground | 12" | 30.5 cm |
| Tooth Description | Yellow Jacket Cutter System | |
| Number of Teeth | 16 | |
| Number of Indexes | 2 | |
| Number of Pockets | 16 | |
| Reversible Pockets | Yes | |
| Cutterwheel Guard | Yes | |
| Chip Containment | 2.2 cu ft | .1 cu m |
| Lower Gearbox | Hydraulic motor |
| Tank capacity | 9 gal | 34.1 L |
| Recommended Oil Type | ISO 68 | |
| System Type | Open loop | |
| Filtration Method | Inline return filter | |
| Pump Flow at Maximum RPM | 16 gpm | 60.6 L/min |
| System relief pressure | 2750 psi | 189.6 bar |
| Flow Control | Autosweep (option) | |
| Directional Control | Standard | |
| Oil Cooler | Yes. Fan-cooled |
| System Voltage | 12 | |
| Battery | 405 | |
| Standard Gauges | Hour meter/tach | |
| Switches | Cutter wheel drive | |
| Controller | Yes |
| Control Station Description | Fixed-rear |
| Track Type | Rubber 7 " (17.8 cm) width | |
| Track Width - Retracted | 35 " (88.9 cm) | |
| Track Width - Extended | 35 " (88.9 cm) | |
| Track Length on Ground | 31.4 " (79.7 cm) | |
| Type of Idler | Cast | |
| Number of Idlers | 5 | |
| Track Drive Pump Type | Hydrostatic | |
| System Relief Pressure | 2900 psi (200 bar) | |
| Pump Flow at Maximum RPM | 11.4 gpm (43.1 L/min) | |
| Track Drive Motor Type | Geroter | |
| Track Brake Type | Hydrostatic | |
| High Speed Travel | 3.2 mph | 5.1 km/h |
| Ground Bearing Pressure - Soft Ground | 3.4 psi | 23.4 kPa |
| Special Paint | Per request | |
| Extended Warranty | Per request | |
| Preventive Maintenance | Per request |