The HG8000TX horizontal grinder from Vermeer boasts the largest infeed opening in its class, helping to increase your productivity and expand job possibilities. Powered by a 950-hp (708.4 kW) CAT Tier 2 engine, this unit handles big diameter wood and large, brushy debris with ease. Plus, its innovative design incorporates several features to help reduce material spillage and jobsite cleanup time.
The HG8000TX is equipped with a tracked undercarriage with 28" (71.1 cm) wide double or triple-grouser track pads. Designed to tackle tough jobs, the HG8000TX enables productivity for the long-haul.
Get up and running quickly with four pre-set infeed settings that control the material’s finished size.
Increase productivity thanks to the exclusive Vermeer SmartGrind system, which automatically controls grinding speed based on engine rpm levels.
Improve cutting performance using the patented series II duplex drum system with reversible hammers and cutter blocks that simplify maintenance and nearly double wear life.
Change screens easily with the on-board screen handler system.
See your Vermeer dealer for comprehensive service and genuine Vermeer replacement parts.
| Maximum Length - Transport | 50.6' | 15.4 m |
| Maximum Length (Operation) | 58.5' | 17.8 m |
| Maximum Width (Transport) | 12' | 3.7 m |
| Weight | 125000 lbs | 56699.1 kg |
| Make and Model | Caterpillar C27 Tier 4i (Stage IIIB) | |
| Number of Cylinders | 12 | |
| Gross Horsepower (Maximum) | 950 hp | 708.4 kw |
| Torque (Max) | 3202 ft-lb | 4341.3 Nm |
| Fuel Tank Capacity | 500 gal | 1892.7 L |
| Max Fuel Consumption | 48.5 gph | 183.6 lph |
| Fuel Type | Ultra-Low Sulfur Diesel (<15 ppm) | |
| Air Cleaner | Dry-Type with primary and secondary elements and restriction indicator | |
| Recommended Oil | See Maintenance Manual | |
| Oil Volume with Filter | 76 qt | 71.9 L |
| Cooling Medium | Liquid | |
| Coolant Capacity (Engine and Radiator) | 35 gal | 132.5 L |
| Alternator | 24 Volt | |
| Fan | Hyraulically driven, reversible | |
| Clutch Type | Hyraulic-operated wet clutch with PTO | |
| Clutch Engagement | Push-Button | |
| Drive Belt Type | V-Belt | |
| Sound Power | 123 dB |
| Make and Model | Caterpillar C27 Tier 2 | |
| Number of Cylinders | 12 | |
| Gross Horsepower (Maximum) | 950 hp | 708.4 kw |
| Torque (Max) | 3539 ft-lb | 4798.2 Nm |
| Fuel Tank Capacity | 500 gal | 1892.7 L |
| Max Fuel Consumption | 47.8 gph | 180.9 lph |
| Fuel Type | Diesel | |
| Air Cleaner | Pleated primary and secondary (qty 3) with pre-cleaners | |
| Oil Filter | Dual spin-on | |
| Recommended Oil | CAT DEO 10W-30/15W-40 | |
| Oil Volume with Filter | 19 qt | 18 L |
| Cooling Medium | Liquid | |
| Coolant Capacity (Engine and Radiator) | 35 gal | 132.5 L |
| Air to Boil Temperature | 140 deg | |
| Alternator | 24 volt, 75 Amp | |
| Fan | 60" (152.4 cm) dia, 10 blade, fixed pitch, reversible | |
| Clutch Type | Hydraulic operated wet clutch push button | |
| Clutch Engagement | 5V - 16 strand | |
| Sound Power | 104.5 dB(A) |
| Make and Model | Caterpillar C32 Tier 2 | |
| Number of Cylinders | 12 | |
| Gross Horsepower (Maximum) | 1125 hp | 838.9 kw |
| Torque (Max) | 3793 ft-lb | 5142.6 Nm |
| Fuel Tank Capacity | 500 gal | 1892.7 L |
| Max Fuel Consumption | 56.7 gph | 214.6 lph |
| Fuel Type | Ultra-Low Sulfer Diesel (<15 ppm) | |
| Air Cleaner | Dry-type with primary and secondary elements and restriction indicator | |
| Recommended Oil | See Maintenance Manual | |
| Oil Volume with Filter | 76 qt | 71.9 L |
| Cooling Medium | Liquid | |
| Coolant Capacity (Engine and Radiator) | 35 gal | 132.5 L |
| Alternator | 24 Volt | |
| Fan | Hydraulically driven, reversible | |
| Clutch Type | Hyrdaulic-operated wet clutch with PTO | |
| Clutch Engagement | Push Button | |
| Drive Belt Type | V-Belt |
| Feed Table Width | 71.5" | 181.6 cm |
| Feed Table Depth | 35.5" | 90.2 cm |
| Feed Table Length - Option One | 24' | 7.3 m |
| Feed Table Capacity | 14.3 cu yd | 10.9 cu m |
| Loading Height | 8.7' | 2.6 m |
| Flare Construction | Integrated with infeed | |
| Feed Conveyor Type | Welded slat chain | |
| Material Construction | Steel | |
| Drive Type | Open-loop hydraulic | |
| Drive Roller Construction | Fabricated steel | |
| Front Idler Roller Construction | Self cleaning steel auger | |
| Infeed Floor Construction | Steel lattice | |
| Infeed Roller Width | 66.5" | 168.9 cm |
| Infeed Roller Weight | 3000 lbs | 1360.8 kg |
| Infeed Roller Diameter | 48" | 121.9 cm |
| Maximum Feed Height | 75" | 190.5 cm |
| Material Type | Welded slat chain | |
| Tooth Design | Serrated bars | |
| Number of Teeth | 12 bars | |
| Drive Motor | Open loop hydraulic | |
| Drive Planetary | 26.18:1 | |
| Feed Roller Down Pressure | Adjustable |
| Thrown Object Deflector | Standard | |
| Deflector Position | Variable |
| Millbox Opening | 71.5" wide x 50" high (181.6 cm x 127 cm) | |
| Drum Diameter | 42" | 106.7 cm |
| Tip Diameter | 52" | 132.1 cm |
| Drum Cutting Width | 72" | 182.9 cm |
| Drum Skin Thickness | 1.3" | 3.2 cm |
| Drum Speed | 1000 rpm | |
| Tip Speed | 13614 rpm | |
| Bearing Type | Double row spherical roller | |
| Bearing - Inner Race Diameter | 6.4" | 16.4 cm |
| Bearing - Dynamic Capacity | 250000 lbs | 113398.1 kg |
| Number of Hammers | 12 | |
| Number of Tips | 24 | |
| Center Retention Pin Dimensions | 2" (5.1 cm) diameter x 95" (241.3 cm) long | |
| Number of Wipers | 24 |
| Millbox Opening | 71.5" wide x 50" high (181.6 cm x 127 cm) | |
| Drum Diameter | 42" | 106.7 cm |
| Tip Diameter | 52" | 132.1 cm |
| Drum Cutting Width | 72" | 182.9 cm |
| Drum Skin Thickness | 1.3" | 3.2 cm |
| Drum Speed | 1000 rpm | |
| Tip Speed | 13614 rpm | |
| Bearing Type | Double row spherical roller | |
| Bearing - Inner Race Diameter | 6.4" | 16.4 cm |
| Bearing - Dynamic Capacity | 250000 lbs | 113398.1 kg |
| Number of Hammers | 12 | |
| Number of Tips | 24 | |
| Center Retention Pin Dimensions | 2" (5.1 cm) diameter x 95" (241.3 cm) long | |
| Number of Wipers | 24 |
| Screen Weight | 800 lbs | 362.9 kg |
| Screen Dimensions | 38" x 73" x 13" (96.5 cm x 185.4 cm x 33 cm) | |
| Screen Type | AR400 | |
| Number of Screens | 2 | |
| Screen Area | 6200 sq in | 39999.9 sq cm |
| Millbox Lid Liner Dimensions | Standard: grade 50; optional: AR400 | |
| Liner Dimensions | 3/4" thick | |
| Anvil Type | Fabricated steel | |
| Anvil Dimensions | 7" x 16" x 83" (18 cm x 41 cm x 211 cm) |
| Length | 96.5' | 29.4 m |
| Width | 66" | 167.6 cm |
| Belt Design | Viper 330# with V-cleat | |
| Splice | Flexco R5 - stainless steel | |
| Return Roller Quantity | 6 | |
| Idler Roller Diameter | 12" | 30.5 cm |
| Idler Roller Bearing | 2-3/16" (4.8 mm) 4 bolt flange | |
| Standard Drive Roller Diameter | 12.8" | 32.4 cm |
| Magnetic Drive Roller Diameter | 12.8" | 32.4 cm |
| Drive Motor | Eaton - VIS 30 | |
| Drive Motor Bearings | 2-3/16" (4.8 mm) 4 bolt flange | |
| Belt Speed | 914 ft/min | 278.6 m/min |
| Load Height | 14.5' | 4.4 m |
| Tank capacity | 1000 gal | 3785.4 L |
| Recommended Oil | Vermeer HyPower 68 | |
| Filtration Method | Return filters (qty 3) | |
| Number of Coolers | 1 |
| System Type | Open-loop | |
| Pump Type | Axial piston, pressure and flow compensated | |
| Pump Flow at Maximum RPM | 51.3 | |
| System Relief Pressure | 4500 |
| System Type | Open-loop | |
| Pump Type | Axial piston, pressure and flow compensated | |
| Pump Flow at Maximum RPM | 31.8 gpm | 120.4 L/min |
| System Relief Pressure | 3600 | |
| Motor Series | Eaton - VIS 30 |
| System Type | Hydrostatic | |
| Pump Type | Axial piston, variable displacement | |
| Pump Flow at Maximum RPM | 31 gpm | 117.3 L/min |
| Motor Series | Axial piston, fixed displacement |
| Tank capacity | 20 gal | 75.7 L |
| Recommended Oil | VMF Gold | |
| Filtration Method | Spin-on filter, 16 micron absolute | |
| Number of Coolers | 1 | |
| System Type | Open-loop | |
| Pump Type | Gear fixed displacement | |
| Pump Flow at Maximum RPM | 10 gpm | 37.9 L/min |
| System Voltage | 24 VDC | |
| Battery | Group 8-D, 1155 CCA (qty 2) | |
| System Protection | Fused |
| Display Type | LCD | |
| Engine Information | Yes | |
| Machine Information | Yes | |
| Operational Faults | yes | |
| Gauges | (Qty 10) Hydraulic systems | |
| Switches | Moisture proof, toggle style |
| Display Type | LCD | |
| Engine Information | Emergency stop, throttle, engine shutdown, | |
| Machine Information | Feed roller rotation, raise/lower, down pressure control, feed table rotation, SmartFeed on/off, emergency stop, throttle control, fan reverse, TOD raise lower, engine shutdown | |
| Operational Faults | Yes | |
| Switches | Sealed membrane | |
| Operating Range | Up to 300' (91.4 m) | |
| Battery Type | (qty 6) AA | |
| Channel Setting | 50 channels |
| Frame Description | Unit body construction |
| Track Frame Description | Rigid frame, reinforced box section | |
| Track Type | D6 | |
| Track Drive Pump Type | Variable displacement, axial piston | |
| Track Drive Motor Type | Hydrostatic with planetary transmission | |
| Track Brake Type | Spring-applied, hydraulic release wet disc parking brake | |
| Track Length on Ground | 15.4' (4.7 m) | |
| Track Width - Option One | 28" wide with double grousers | |
| Track Width Option One - Ground Bearing Pressure - Hard Ground | 60.4 psi | 416.4 kPa |
| Track Width Option One - Ground Bearing Pressure - Soft Ground | 12.1 psi | 83.4 kPa |
| Track Width Option Two - Ground Bearing Pressure - Option | 12.1 psi | 83.4 kPa |
| Track Width Option Two - Ground Bearing Pressure - Option Two | 35.8 psi | 246.8 kPa |
| Type of Idler | Compressed coil spring with hydraulic tensioning | |
| Pump Flow at Maximum RPM | 38.3 gpm | 144.9 L/min |
| System relief pressure | 5070 psi | 349.6 bar |
| Maximum Speed | 2 mph | 3.2 km/h |
| Maximum Creep Speed - (Low) | .6 mph | 1 km/h |
| Air Compressor Brand | Ingersoll-Rand | |
| Engine | 12.5 hp (9.3 kW) Kohler | |
| Maximum Pressure | 175 psi | 12.1 bar |
| Maximum Air Flow | 24 cfm | .7 cmm |
| Tank capacity | 30 gal | 113.6 L |
| Screens | yes | |
| Extended Warranty | yes | |
| Preventative Maintenance | yes | |
| Special Paint | yes |