Maximize your drilling muscle with the field-tested D1000x900. Loaded with feature after feature to improve performance, reliability and durability, the D1000x900 is equipped with dominating twin Caterpillar C-27 engines, producing a maximum of 92,000 ft-lb/125,120 Nm of rotational torque and 1,000,000 lbs/4,448 kN of thrust/pullback.
| Length (Minimum Transport) | 50.5' | 15.4 m |
| Width | 8.5' | 2.6 m |
| Height (Minimum Transport) | 11.5' | 3.5 m |
| Weight | 101000 lbs | 45812.8 kg |
| Suspension | Triple axle with air ride suspension | |
| Front Base Anchor Length | 20' | 6.1 m |
| Front Base Anchor Width | 6' | 1.8 m |
| Front Base Anchor Height | 24" | 61 cm |
| Front Flat Anchor Length | 9.5' | 2.9 m |
| Front Flat Anchor Width | 5' | 1.5 m |
| Front Flat Anchor Height | 8" | 20.3 cm |
| Rear Base Anchor Length | 16' | 4.9 m |
| Rear Base Anchor Width | 7.8' | 2.4 m |
| Rear Base Anchor Height | 8" | 20.3 cm |
| Number of Rear Legs | 2 | |
| Drill Rack Angle | 8 degrees to 12 degrees |
| Length | 10' | 3.1 m |
| Width | 8.5' | 2.6 m |
| Height | 9' | 2.7 m |
| Weight | 6000 lbs | 2721.6 kg |
| Heat and Air Conditioning | In-wall combination unit |
| Length | 22.4' | 6.8 m |
| Width | 8' | 2.4 m |
| Height | 10.3' | 3.1 m |
| Weight | 38000 lbs | 17236.5 kg |
| Make and Model | (1) CAT C-27 | |
| Fuel Type | Diesel | |
| Fuel Capacity | 500 gal | 1892.7 L |
| Hydraulic Tank Capacity | 720 gal | 2725.5 L |
| Maximum Engine RPM | 2000 rpm | |
| Gross Horsepower | 800 hp | 596.6 kw |
| EPA Certification Family | Tier 2 (EU Stage II) |
| Length | 32.2' | 9.8 m |
| Width | 8' | 2.4 m |
| Height | 10.3' | 3.1 m |
| Weight | 57260 lbs | 25972.7 kg |
| Make and Model | (2) CAT C-18 | |
| Fuel Type | Diesel | |
| Fuel Capacity | 1000 gal | 3785.4 L |
| Hydraulic Tank Capacity | 720 gal | 2725.5 L |
| Maximum Engine RPM | 2000 rpm | |
| Gross Horsepower | 1200 hp | 894.8 kw |
| EPA Certification Family | Tier 3 (EU Stage II) |
| Length | 32.2' | 9.8 m |
| Width | 8' | 2.4 m |
| Height | 10.3' | 3.1 m |
| Weight | 57260 lbs | 25972.7 kg |
| Make and Model | (2) CAT C-27 | |
| Fuel Type | Diesel | |
| Fuel Capacity | 1000 gal | 3785.4 L |
| Hydraulic Tank Capacity | 720 gal | 2725.5 L |
| Maximum Engine RPM | 2000 rpm | |
| Gross Horsepower | 1600 hp | 1193.1 kw |
| EPA Certification Family | Tier 2 (EU Stage II) |
| Thrust | 1000000 lbs | 4448.2 kN |
| Pullback | 1000000 lbs | 4448.2 kN |
| Maximum Spindle Torque | 102500 ft-lb | 138971.6 Nm |
| Maximum Spindle Torque (Low at Maximum Engine RPM) | 102500 ft-lb | 138971.6 Nm |
| Maximum Spindle Speed at Maximum Engine RPM (with PS800) | 36 rpm | |
| Maximum Spindle Speed at Maximum Engine RPM (with PS1200/PS1600) | 54 rpm | |
| Maximum Carriage Speed at Maximum Engine RPM | 77 ft/min | 23.5 m/min |
| Number of Rotation Motors | 1 | |
| Number of Drive Motors | 4 | |
| Mud Swivel | 3" | 7.6 cm |
| Breakout Force | 253000 ft-lb | 343022.5 Nm |
| Configuration | 3-jaw clamp, 8 " (20.3 cm) | |
| Weight | 3800 lbs | 1723.7 kg |
| Travel | 6' | 1.8 m |
| Inside Diameter | 9.8" | 24.9 cm |
| Clamp Force | 250000 ft-lb | 338955 Nm |
| Configuration | 2-jaw clamp | |
| Inside Diameter | 10" | 25.4 cm |
| Remote Lockout | Yes | |
| Strike Alert | Yes |